Yes!Fresh Acrylic Aquarium Fish Tank Divider

We use creative idea to make this divider to perfectly match almost all types and all size (from 10-950 gal) of fish tanks.
Before purchasing, you are strongly recommended to measure the inner width where you’d like to divide your tank and the water level height you’d like to keep inside.
After measuring,please refer to below Size Chart to order.

Compatible with Almost Any Shape of 10-950 Gallon Fish Tank with Suction Cups:Measure the inner width of the 2 points in your tank where you want to divide the tank and the inside water level height, then choose the model and quantity of the divider kit fit for your tank . Our aquarium dividers are compatible with almost all types and all sizes of fish tank.
Non-decomposable,Easy to Clean and Works Long Time:Not like the mesh divider- a year some of them start disintegrating,falling apart and leaving holes,this fish tank divider is made with brocken-proof and firm & clear material which is durable and all the time keeps in a brand-new condition withouth too much maintainance.
Smaller Gaps on Either Sides Because of Small Screwable & Water Circulation Holes in all places the Divider:The divider holes are very small which are only 4.2mm diamter, it allows water circulation,straws fixing and stop most of fishes from swimming through.Holes all over the divider pieces and make the widths and height of the assembling divider finely adjustable to achieve small gap between the tank sides.
Hyperelastic Material Creates Curvilinear Barrier without Suction Cups:The divider can be bent to form a unique curve barrier which will be stucked by fish tank sides instead of being fixed by suction cups . Kindly be reminded to screw & bend the divider pieces at the direction without some divider piece ends sticking up whilst bending, and never bend too much to avoid huge rebound.
No Tools，No Techniques Needed & Easy Screws-tightening Assemly is a Will have to:You want to connect divider pieces yourself by tightening the secrews, it is easy and bare-handed job.Alwayse leave a very narrow gap between the divider and the wall of your tank if you do not want the small fish fry swimming through the gap.You’ll be able to even tilt a little point of the divider to fix the tank wall when the connected divider is a little wider than the inner width of the tank.